Table of Contents
Advertisement
show whitelist-db cpsec
show whitelist-db cpsec [mac-address <mac-address>]
Description
Display the campus AP whitelist for campus APs using the control plane security feature.
Syntax
Parameter
mac-address <mac-address>
Usage Guidelines
Use this command to display the contents of the control plane security whitelist. To view information for a single
AP, use the command show whitelist-db cpsec mac-address <mac-address>. To view a list of all secure APs on your
controller, use the command show whitelist-db cpsec. If your deployment includes both master and local controllers,
then the campus AP whitelist on every controller contains an entry for every secure AP on the network, regardless of
the controller to which it is connected.
Example
The output of the following command shows the campus AP whitelist entry for an AP with the MAC address
00:16:CF:AF:3E:E1:
(host) #show whitelist-db cpsec mac-address 00:16:CF:AF:3E:E1
Control-Plane Security Whitelist-entry Details
----------------------------------------------
MAC-Address
Revoke Secondary Last
Text
-----------
--
--------- ---------
00:16:CF:AF:3E:E1 Enabled
Whitelist Entries: 1
The output of this command includes
Syntax
Parameter
MAC-Address
Enable
State
1346 | show whitelist-db cpsec
Description
MAC address of the campus AP you want to enter into the cpsec whitelist
database.
Enable
State
Key
Updated
------
-----
certified-controller-cert
Description
MAC address of the campus AP.
Shows whether the campus AP has been enabled or disabled.
Shows the current state of the campus AP.
unapproved-no-cert: AP has no certificate and is not approved.
l
unapproved-factory-cert: AP has a preinstalled certificate that was not approved.
l
Cert-Type
---------
switch-cert
Dell PowerConnect W-Series ArubaOS 6.2 | Reference Guide
Fri Oct 16 01:
Advertisement
Table of Contents
