Dell PowerConnect W-7200 Series Reference Manual page 548

show local-cert-mac
show local-cert-mac
tag <mac>
Description
Display the IP, MAC address and certificate configuration of local controllers in a master-local configuration.
Syntax
Parameter
tag <tag>
Usage Guidelines
By default the output of this command shows each local controller's IP and MAC address and the type of certificate
used by those local controllers (Custom or Factory). Use the optional tag parameter to display information for a
single controller only.
Example
The output of this command shows that two local controllers have a custom certificate installed.
(host) # show local-cert-mac
Local Switches configured by Local Certificate
-----------------------------------------------
Switch IP of the Local
----------------------
10.4.62.3
10.4.62.5 00:0B:86:F0:05:60 Custom Undefined
The output of this command includes the following information:
Column
Switch IP of the Local
MAC address of the
Local Certificate
Cert-Type
CA Cert
548 | show local-cert-mac
Description
IP address of the local controller or MAC address of the local controller certificate.
MAC address of the Local Certificate
------------------------------------
0B:86:F0:12:AC:15
Description
IP address of the local controller
MAC address of the certificate on the local controller
Type of certificate used by the local controller.
Custom: User-installed, custom certificate
l
Factory: Factory-installed certificate
l
Name of the Certificate Authority (CA) certificate.
Cert-Type CA cert
--------- -------
Dell PowerConnect W-Series ArubaOS 6.2 | Reference Guide