Dell PowerConnect W-7200 Series Reference Manual page 899

show ap vlan-usage
show ap vlan-usage [{ap-name <ap-name>}|{bssid <bssid>|{essid <essid>|{ip-addr <ip-addr>}]
Description
Show the numbers of clients on each VLAN.
Syntax
Parameter
ap-name <ap-name>
bssid <bssid>
essid <essid>
ip-addr <ip-addr>
Examples
The output of this command displays the VLAN Usage table.
(host) #show ap vlan-usage
VLAN Usage Table
----------------
VLAN ID Clients
------- -------
64 1
65 32
66 44
The output of this command includes the following information:
Column
VLAN ID
Clients
Command History
Introduced in ArubaOS 3.0.
Command Information
Platforms
All platforms
Dell PowerConnect W-Series ArubaOS 6.2 | Reference Guide
Description
Show VLAN data for an AP with a specific name.
Show VLAN data for a specific Basic Service Set Identifier (BSSID) on an AP. The Basic
Service Set Identifier (BSSID) is usually the AP's MAC address.
Show VLAN data for a specific Extended Service Set Identifier (ESSID). An Extended
Service Set Identifier (ESSID) is a alphanumeric name that uniquely identifies a wireless
network. If the name includes spaces, you must enclose the ESSID in quotation marks.
Show VLAN data for an AP with a specific IP address by entering an IP address in dotted-
decimal format.
Description
ID number of the wireless VLAN.
Number of clients currently using the specified VLAN.
Licensing
Base operating system
Command Mode
Enable or Config mode on master controllers
show ap vlan-usage | 899