Dell PowerConnect W-7200 Series Reference Manual page 1419

stm
add-blacklist-client <macaddr>
kick-off-sta <macaddr> <bssid>
purge-blacklist-clients
remove-blacklist-client <macaddr>
Description
This command is used to manually disconnect a client from an AP or control the blacklisting of clients.
Syntax
Parameter
add-blacklist-client
kick-off-sta
<macaddr>
<bssid>
purge-blacklist-client
remove-blacklist-client
<macaddr>
Usage Guidelines
When you blacklist a client, the client is not allowed to associate with any AP in the network. If the client is
connected to the network when you blacklist it, a deauthentication message is sent to force the client to disconnect.
The blacklisted client is blacklisted for the duration specified in the virtual AP profile. The client blacklist supports
up to 4,000 individual client entries.
The controller retains the client blacklist in the user database, so the information is not lost if the controller reboots.
When you import or export the controller's user database, the client blacklist will be exported or imported as well.
Example
The following command blacklists a client:
(host) #stm add-blacklist-client 00:01:6C:CC:8A:6D
Command History
Version
ArubaOS 1.0
ArubaOS 6.0
Dell PowerConnect W-Series ArubaOS 6.2 | Reference Guide
Description
MAC address of the client to be added to the denial of service list.
When you use the kick-off-sta feature specify a client's MAC address and
BSSID, the AP sends deauthorization frames to the station to disconnect it.
MAC address of client to be disconnected.
The associated BSSID of the client to be disconnected.
Clear the entire client blacklist.
Specify the MAC address of a client to remove it from the denial of service
list.
Modification
Command introduced.
The purge-client-blacklist parameter was introduced.
The start-trace and stop-trace parameters are no longer functional.
stm | 1419