Dell PowerConnect W-7200 Series Reference Manual page 679

show ap association remote
show ap association remote [ap-name <ap-name>|ap-group <ap-group>|bssid <bssid>|channel
<channel>|essid <essid>
Description
Display the association table for an individual AP or group of APs in bridge mode.
Syntax
Parameter
ap-name <ap-name>
ap-group <ap-group>
bssid <bssid>
channel <channel>
essid <essid>
Examples
The output of the command below shows the association table for clients in the AP group group1.
show ap association remote ap-group group1
Flags: W: WMM client, A: Active, R: RRM client
PHY Details: HT: High throughput; 20: 20MHz; 40: 40MHz ss:
Association Table
-----------------
Name bssid
essid vlan-id
---- -----
-- -------
AP71 00:0b:23:c1:d6:11 00:12:6d:03:1c:f1
0x108e
Num Clients:1
The output of this command includes the following information:
Column
Name
bssid
mac
Dell PowerConnect W-Series ArubaOS 6.2 | Reference Guide
Description
Show AP associations for a specific remote AP.
Show AP associations for a specific group of remote APs.
Show the AP associations for an specific AP Basic Service Set Identifier (BSSID). The Basic
Service Set Identifier (BSSID) is usually the AP's MAC address.
Show remote AP associations for a specific channel.
Show remote AP associations for an Extended Service Set Identifier (ESSID). An Extended
Service Set Identifier (ESSID) is a alphanumeric name that uniquely identifies a wireless
network. If the name includes spaces, you must enclose the ESSID in quotation marks.
tunnel-id phy assoc.time
--------- --- ----------
a
Description
Name of an AP
The AP Basic Service Set Identifier (BSSID)
MAC address of the AP
spatial streams
num assoc Flags
--------- -----
y
23s
y
show ap association remote | 679
1