Dell PowerConnect W-7200 Series Reference Manual page 475

ping
ping
<ipaddress> | ipv6 {<global-address> | interface vlan <vlanid> <linklocal-address>}
Description
This command sends five ICMP echo packets to the specified ip address. You can also ping the specified IPv6
address.
Syntax
Parameter
<ipaddress>
ipv6
<global-address>
interface vlan <vlanid>
<linklocal-address>
Usage Guidelines
You can send five ICMP echo packets to a specified IP address. The controller times out after two seconds. You can
also ping the specified IPv6 address.
Examples
The following example pings 10.10.10.5.
(host) #ping 10.10.10.5
The sample controller output is:
Press 'q' to abort.
Sending 5, 100-byte ICMP Echos to 10.10.10.5, timeout is 2 seconds:!!!!!
Success rate is 100 percent (5/5), round-trip min/avg/max = 0.408/0.5434/1.073 ms
The following example pings the specified IPv6 global address:
(host) #ping ipv6 2005:d81f:f9f0:1001::14
The sample controller output is:
Press 'q' to abort.
Sending 5, 100-byte ICMPv6 Echos to 2005:d81f:f9f0:1001::14, timeout is 2 seconds:
!!!!!
Success rate is 100 percent (5/5), round-trip min/avg/max = 0.309/0.3726/0.463 ms
Dell PowerConnect W-Series ArubaOS 6.2 | Reference Guide
Description
Destination IP Address
Specify this parameter to ping an IPv6 address.
Specify the IPv6 global address.
Specify the IPv6 link local address of a specific VLAN interface.
ping | 475