Dell PowerConnect W-7200 Series Reference Manual page 1334

show voice rtcp-inactivity
show voice rtcp-inactivity
Description
Displays the status of RTCP protocol.
Syntax
No parameters.
Example
The output of this command shows the status of RTCP protocol.
(host) #show voice rtcp-inactivity
Voice rtcp-inactivity:disable
Command History
Version
ArubaOS 3.3.1
Command Information
Platforms
All platforms
1334 | show voice rtcp-inactivity
Description
Command introduced.
Licensing
This command requires the PEFNG
license
Command Mode
Config or Enable mode on master or local
controllers
Dell PowerConnect W-Series ArubaOS 6.2 | Reference Guide