Dell PowerConnect W-7200 Series Reference Manual page 833

Column
11a Mode/Chan/EIRP/Cli
Command History
Introduced in ArubaOS 3.0.
Command Information
Platforms
All platforms
show ap radio-summary
show ap radio-summary {ap-name <ap-name>|dot11a|dot11g||ip-addr <ip-addr>|ip6-addr <ip6-
addr>}
Description
Show AP radios registered to this controller.
Syntax
Parameter
ap-name <ap-name>
dot11a
dot11g
ip-addr <ip-addr>
ip6-addr <ip-addr>
Example
The output of the command in the example below displays statistics for the AP's radio, as well as statistics for
transmitted and received frames.
In the actual command-line interface, it will appear in a single, long table.
(host) #show ap radio-summary
APs Radios information
----------------------
Name
----
Dell PowerConnect W-Series ArubaOS 6.2 | Reference Guide
Description
Isotropic Radiated Power (EIRP)/Number of Clients associated with the radio
802.1a radio type and mode/802.11a radio channel used by the AP/current Effective
Isotropic Radiated Power (EIRP)/Number of Clients associated with the radio.
Licensing
Base operating system
Description
Allows you to filter radio information by AP name.
Allows you to filter 802.11a radio information.
Allows you to filter 802.11g radio information.
Allows you to filter radio information by IP address.
Allows you to filter radio information by IPv6 address.
Group AP Type
----- -------
Command Mode
Enable or Config mode on master controllers
IP Address Band Mode
---------- ---- ----
show ap radio-summary | 833