Show User - Dell PowerConnect W-7200 Series Reference Manual

show user

show user
ap-group <ap-group>
ap-name <ap-name>
authentication-method dot1x|mac|opensystem|psk|stateful-dot1x|via-vpn|vpn|web[rows
<NUMBER> <NUMBER>]
bssid <A:B:C:D:E:F> rows <NUMBER> <NUMBER>
devtype <device>
essid <STRING> rows <NUMBER> <NUMBER>
internal rows <NUMBER> <NUMBER>
ip <A.B.C.D> rows <NUMBER> <NUMBER>
location b.f.l rows <NUMBER> <NUMBER>
mac <A:B:C:D:E:F>
mobile {[bindings][visitors]} [rows <NUMBER> <NUMBER>]
name <STRING>
phy-type {[a]|[b]}[rows <NUMBER> <NUMBER>]
role <STRING> rows <NUMBER> <NUMBER>
rows <NUMBER> <NUMBER>
Description
Displays detailed information about the controller's connection to a user device, in regards to mobility state and
statistics, authentication statistics, VLAN assignment method, AP datapath tunnel info, radius accounting
statistics, user name, user-role derivation method, datapath session flow entries, and 802.11 association state and
statistics. The show user command allows you to filter specific information by parameter.
Syntax
Parameter
ap-group <ap-group>
ap-name <ap-name>
authentication-method
dot1x
mac
opensystem
psk
stateful-dot1x
via-vpn
vpn
1296 | show user
Description
Filter the output of this command by showing users connected to APs that belong
to the specified AP group.
Filter the output of this command by the name of the AP to which the user is con-
ected.
Filter the output of this command by the authentication method used for the
device:
Show data for devices using 802.1X authentication.
Show data for devices using MAC authentication.
Show data for devices using open (no) authentication.
Show data for devices that do not use authentication but use a pre-shared key for
encryption.
Show data for devices using stateful 802.1X authentication.
Show data for devices that authenticate using Dell VIA.
Show data for devices using VPN authentication.
Dell PowerConnect W-Series ArubaOS 6.2 | Reference Guide