Dell PowerConnect W-7200 Series Reference Manual page 1194

show profile-list ap
show profile-list ap [ enet-link-profile | mesh-cluster-profile |
mesh-ht-ssid-profile | mesh-radio-profile | regulatory-domain-profile |
snmp-profile | snmp-user-profile | system-profile | wired-ap-profile ]
Description
Displays the list of AP profiles.
Syntax
Parameter
enet-link-profile
mesh-cluster-profile
mesh-ht-ssid-profile
mesh-radio-profile
regulatory-domain-profile
snmp-profile
snmp-user-profile
system-profile
wired-ap-profile
Example
The output of this command shows list of profiles that are invalid and also displays the error in those profiles.
(host) # show profile-list aaa authentication captive-portal
Captive Portal Authentication Profile List
------------------------------------------
Name References
---- ----------
default 1
Command History
This command was available in ArubaOS 3.0
Command Information
Platforms
All platforms
1194 | show profile-list ap
Description
Display a list of AP Ethernet link profiles.
Display a list of mesh cluster profiles used by mesh nodes.
Display a list of mesh high-throughput SSID profiles used by mesh nodes.
Display a list of mesh radio profiles used by mesh nodes.
Display a list of AP regulatory profiles.
Display a list of SNMP profiles.
Display a list of SNMPv3 user profiles.
Display a list of AP system profiles.
Display a list of wired AP profiles.
Profile Status
--------------
Licensing
Base operating system
Command Mode
Config or Enable mode on master or local
controllers
Dell PowerConnect W-Series ArubaOS 6.2 | Reference Guide