show valid-network-oui-profile
show valid-network-oui-profile
Description
This command displays the Valid Equipment OUI Profile table
Syntax
No parameters
Usage Guidelines
If you used the valid-networkoui-profile to add a new OUI to the controller, issue the show valid-network-oui-profile
command to see a list of current OUIs.
Example
(Host) (config) #show valid-network-oui-profile
Valid Equipment OUI profile
---------------------------
Parameter
Value
---------
-----
OUI
00:1A:1E
Command History
Release
ArubaOS 5.0
Command Information
Platforms
Available on all platforms
Dell PowerConnect W-Series ArubaOS 6.2 | Reference Guide
Modification
Command introduced
Licensing
Base operating system
Command Mode
Config mode on master controllers
show valid-network-oui-profile | 1303