Dell PowerConnect W-7200 Series Reference Manual page 1169

show ntp servers
show rft servers [brief]
Description
Show information for Network Time Protocol (NTP) servers.
Syntax
Parameter
brief
Examples
The following example shows values for the primary and backup NTP servers. The primary server is marked with an
asterisk (*) and the backup server is marked with an equals sign (=). Note that a backup server will not display delay,
offset or dispersion data, as it is not currently in use.
(host) #show ntp servers
remote
=======================================================================
=10.4.0.21
*10.1.1.250
The output of this command includes the following parameters:
Parameter
remote
local
st
poll
reach
delay
offset
disp
Dell PowerConnect W-Series ArubaOS 6.2 | Reference Guide
Description
Display the IP address of the defined NTP servers, iburst and key settings.
local st poll reach
10.6.2.253 16 1024
10.6.2.253 2 1024
Description
IP address of the remote NTP server defined using the cli command
IP address of the local clock.
NTP uses hierarchical levels of clock sources, or strata, and assigns each layer a number starting with
zero at the root. The st column in the output of this command represents the number of servers between the
configured NTP server and the root reference clock.
Interval, in seconds, between the local NTP server's attempt to poll the remote NTP server.
An index that measures whether or not the remote NTP server could be reached at eight most recent
polling intervals. If the NTP server has just been configured and hasn't yet been polled successfully, the
value will be zero (0). A value of 377 indicates that the last eight poll queries were successful.
Delay, in seconds, between the time that the local clock polls the NTP server and the NTP server returns a
reply.
The difference in time, in seconds, between the local clock and the NTP server.
Dispersion represents the maximum error of the local clock relative to the reference clock, and is a
measurement of the time server and network quality. Lower dispersion values are preferred over higher
dispersion values.
delay offset
0 0.00000 0.000000 0.00000
377 0.00081 -0.010376 0.03040
ntp
disp
server.
show ntp servers | 1169