Dell PowerConnect W-7200 Series Reference Manual page 1018

show ids impersonation-profile
show ids impersonation-profile <profile-name>
Description
Display an IDS Impersonation Profile.
Syntax
Parameter
<profile-name>
Usage Guidelines
Issue this command without the <profile-name > parameter to display the IDS Impersonation profile list. Include a
profile name to display detailed configuration information for that profile.
Examples
The example below displays that the controller has five configured Impersonation profiles.
(host) (config) #show ids impersonation-profile
IDS Impersonation Profile List
------------------------------
Name
----
default
test
test1
Wizard-test
Wizard-test2
Total:5
In the example above, the Reference column indicates the number of references to the profile named in the Name
column. The Profile Status column is blank unless the rule is predefined.
The example below displays the configuration settings for the profile test1.
(host) (config) #show ids impersonation-profile test1
IDS Impersonation Profile "test1"
---------------------------------
Parameter
---------
Detect AP Impersonation
Protect from AP Impersonation
Beacon Diff Threshold
Beacon Increase Wait Time
Detect AP Spoofing
Detect Beacon Wrong Channel
Beacon Wrong Channel Detection Quiet Time
Detect Hotspotter Attack
Hotspotter Quiet Time
The output of this command includes the following parameters:
1018 | show ids impersonation-profile
Description
Name of an IDS Impersonation profile.
References Profile Status
---------- --------------
4
0
1
1
1
Value
-----
false
false
50 %
3 sec
true
false
900 sec
true
900 sec
Dell PowerConnect W-Series ArubaOS 6.2 | Reference Guide