Dell PowerConnect W-7200 Series Reference Manual page 554

show remote-node
Description
Shows configuration and other information about the remote node.
Syntax
Parameter
config <mac-address>
dhcp-instance <mac-address>
license-usage
running-config <mac-
address>
Usage Guidelines
Issue this command to display configuration, DHCP pool information license usage information and running
configuration information for a remote node.
Examples
This example shows a remote node configuration.
(host) #show remote-node config 00:0b:86:f0:26:e0
controller-ip vlan 2
vlan 2
vlan 3
interface fastethernet "1/7"
interface fastethernet "1/7" switchport access vlan 3
interface fastethernet "1/7" trusted
interface fastethernet "1/2"
interface fastethernet "1/2" switchport access vlan 2
interface fastethernet "1/2" trusted
interface fastethernet "1/3"
interface fastethernet "1/3" switchport access vlan 2
interface fastethernet "1/3" trusted
interface fastethernet "1/1"
interface fastethernet "1/1" switchport access vlan 2
interface fastethernet "1/1" trusted
interface vlan 3
interface vlan 3 ip address 10.3.29.79 255.255.255.0
interface vlan 2
interface vlan 2 ip address 192.167.1.1 255.255.255.240
uplink wired vlan 4
interface tunnel 1
interface tunnel 1 tunnel destination remote-node-master-ip
554 | show remote-node
Description
Shows configuration information for the remote node.
Shows the remote node address pool information including pool name, DHCP pool start
IP address, DHCP pool mask, DHCP pool broadcast IP address, and the DHCP pool
gateway IP address.
Shows the remote node AP license usage information including the remote node MAC
address, IP address and the AP, PEF and RF Protect licenses along with the last time the
licenses were updated.
Shows the running configuration for this remote node
Dell PowerConnect W-Series ArubaOS 6.2 | Reference Guide