Neighbor Peer-Group (Creating Group) - Dell Force10 Z9000 Reference Manual

A neighbor may keep its configuration after it was added to a peer group if the neighbor's
configuration is more specific than the peer group's, and the neighbor's configuration does not
affect outgoing updates.
A peer group must exist before you add a peer to it. If the peer group is disabled (shutdown)
the peers within the group are also disabled (shutdown).
Related
clear ip bgp
Commands

neighbor peer-group (creating group)

show ip bgp peer-group
show ip bgp neighbors
neighbor peer-group (creating group)
Allows you to create a peer group and assign it a name.
C-Series, E-Series, S-Series, Z-Series, S4810
Syntax neighbor peer-group-name peer-group
To delete a peer group, use the no neighbor peer-group-name peer-group
command.
Parameters
peer-group-name
Defaults Not configured.
Command Modes ROUTER BGP
Command History
Version 8.3.11.1
Version 8.3.7.0
Version 7.8.1.0
Version 7.7.1.0
Usage When you create a peer group, it is disabled (Shut mode).
Information
Related
neighbor peer-group (assigning peers)
Commands
neighbor remote-as
neighbor shutdown
– resets BGP sessions.
– creates a peer group.
– views BGP peers.
– views BGP neighbors configurations.
Enter a text string up to 16 characters long as the name of the peer
group.
Introduced on the Z9000.
Introduced on the S4810.
Introduced on the S-Series.
Introduced on the C-Series.
– assigns a indirectly connected AS to a neighbor or peer group.
– disables a peer or peer group.
– assigns routers to a peer group.
371