Neighbor Peer-Group (Creating Group) - Dell C9000 Series Reference Manual

show ip bgp peer-group
show ip bgp neighbors

neighbor peer-group (creating group)

Allows you to create a peer group and assign it a name.
C9000 Series
Syntax
neighbor peer-group-name peer-group
To delete a peer group, use the no neighbor peer-group-name peer-group
command.
Parameters
peer-group-name
Defaults Not configured.
Command Modes ROUTER BGP
Command History
This guide is platform-specific. For command information about other platforms, refer
to the relevant Dell Networking OS Command Line Reference Guide.
The following is a list of the Dell Networking OS version history for this command.
Version
9.9(0.0)
9.2(1.0)
8.3.19.0
8.3.11.1
8.3.7.0
7.8.1.0
7.7.1.0
Usage Information When you create a peer group, it is disabled (Shut mode).
Related
neighbor peer-group (assigning peers)
Commands
neighbor remote-as
neighbor shutdown
— views BGP peers.
— views BGP neighbors configurations.
Enter a text string up to 16 characters long as the name of the
peer group.
Description
Introduced on the C9010.
Introduced on the Z9500.
Introduced on the S4820T.
Introduced on the Z9000.
Introduced on the S4810.
Introduced on the S-Series.
Introduced on the C-Series.
— assigns routers to a peer group.
— assigns a indirectly connected AS to a neighbor or peer group.
— disables a peer or peer group.
Border Gateway Protocol 480