Neighbor Peer-Group (Creating Group) - Dell Z9500 Reference Manual

show ip bgp neighbors

neighbor peer-group (creating group)

Allows you to create a peer group and assign it a name.
Z9500
Syntax
neighbor peer-group-name peer-group
To delete a peer group, use the no neighbor peer-group-name peer-group
command.
Parameters
peer-group-
name
Defaults Not configured.
Command ROUTER BGP
Modes
Command
This guide is platform-specific. For command information about other platforms,
History
refer to the relevant Dell Networking OS Command Line Reference Guide.
The following is a list of the Dell Networking OS version history for this command.
Version
9.2(1.0)
8.3.19.0
8.3.11.1
8.3.7.0
7.8.1.0
7.7.1.0
Usage When you create a peer group, it is disabled (Shut mode).
Information
Related
neighbor peer-group (assigning peers)
Commands
neighbor remote-as
group.
neighbor shutdown
Border Gateway Protocol
— views BGP neighbors configurations.
Enter a text string up to 16 characters long as the name of
the peer group.
Description
Introduced on the Z9500.
Introduced on the S4820T.
Introduced on the Z9000.
Introduced on the S4810.
Introduced on the S-Series.
Introduced on the C-Series.
— assigns routers to a peer group.
— assigns a indirectly connected AS to a neighbor or peer
— disables a peer or peer group.
401