Appendix A Operation Check Sheet(Installation/Operation Check) - Fujitsu PRIMERGY LTO3 User Manual

Appendix A
Sheet(Installation/Operation
Check)
Tape Drv LTO3 Ultrium3 400GB is a precision instrument and improper daily operation (cleaning/
data cartridge management/ installation environment, etc.) will lead to troubles such as backup
failure.
We provide here an "Operation Check Sheet" to avoid troubles. The following items are
recommended operations by Fujitsu.
Classificat
No Check
ion
1
2
Cleaning
3
4
Operation Check
Check item
❑
Is head cleaning
performed once
every three months?
❑
Is cleaning
performed when the
Clean LED blinks?
❑
Is the replacement
cycle of the cleaning
cartridge set to the
replacement cycle of
the product (per 50)?
❑
When the inserted
cleaning cartridge is
automatically
ejected and the Tape
Error LED is blink-
ing, is the cleaning
cartridge replaced?

Appendix A Operation Check Sheet(Installation/Operation Check)

Description / tasks (*)
Periodical cleaning is required as the magnetic head
accumulates dust or dirt regardless of the use of this
product. If soiled with dust or dirt, the magnetic head
may scratch the surface of the tape or reduce the life of
the data cartridge.
* Clean this product every three months.
This product provides a function that causes the Clean
LED to blinks when it judges that cleaning is required,
urging you to perform cleaning. If the product is used
while the Clean LED is blinking, the data cartridge and
backup data may be damaged. It is also possible that the
worn-out data cartridge will dirty the tape heads, etc.
* When the Clean LED blinks, immediately perform
cleaning. If the Clean LED blinks again, consider
replacing the data cartridge.
The cleaning cartridge is required to be replaced either
after being used 50 times or after five years of use,
whichever is earlier.
* Replace the cleaning cartridge periodically according
to the operations.
When the cleaning cartridge is automatically ejected and
the Tape Error LED is blinking, the cleaning cartridge
has been used up.
* Replace the cartridge with a new data cartridge.
E
85