Chapter 4 Removal And Replacement Procedures; Spare Parts - Fujitsu MAB3091FC Series Maintenance Manual

CHAPTER 4
This chapter explains how to remove and replace a disk drive. It is assumed that the reader already has
a through understanding of the replacement of the whole disk drive.
Note the following when removing and replacing a disk drive:
•
A disk drive must be removed from the host system.
•
The section numbers in parentheses refer to the previous section.
•
Install a new disk drive by reversing the removal procedure.
For effective maintenance, abide by the following guidelines:
•
Removed screws and parts must be placed in a place or container where they will not be
lost or damaged.
•
All maintenance work must be recorded.
•
Screws must be tightened, but not overtightened.
•
To discharge static electricity from the human body, touch the frame (grounding) or wear
the grounding band before touching PCA.
4.1

Spare Parts

No spare parts are available. For the model (type name) and parts number (PN) for ordering a
new disk drive, refer to Table 4.1.
REMOVAL AND REPLACEMENT
PROCEDURES
4.1 Spare Parts
4.2 Disk Drive Removal
C141-F028-01EN 4 - 1