Tape Library Error Codes; Example Error Code - Fujitsu ETERNUS LT40 S2 Installing, Starting Up And Maintaining

Chapter 4 Troubleshooting

4.6 Tape Library Error Codes

Media Removal
If
(SAS or FC) is disconnected, you have to reboot the library. After reboot the
Allowed
.
4.6 Tape Library Error Codes
If an error occurs during operation of the library, the library stops the current operation and displays an error
code on the LCD screen. Unless otherwise noted in
library and retrying the last operation. If the error persists, contact support personnel.
4.6.1

Example Error Code

EVENT -6
A5 F1
Where:
• Sequence number -6 indicates the position in sequence list, 0 being the most recent.
• Log shows a load error (code A5 = fan error, sub code F1 = caused by the fan at the back connector plate).
The event log with the library also includes a date stamp for each event. Press
timestamp in the following format:
ddd:hh:mm:ss:HH
where:
ddd
days
hh
hours
mm
minutes
ss
seconds
HH
1/100 second
A description of each error code and possible solution is provided in the following table.
FUJITSU Storage ETERNUS LT40 S2/LT60 S2 LTO Library Installing, Starting Up and Maintaining
Prevented
is set to and the interface connection between host adapter and library or drive
80
Copyright 2018 FUJITSU LIMITED
Media Removal
Table 4.4, try to resolve the error by cycling power to the
Enter
is reset to
to display the associated
P3AM-5392-07ENZ0