Raid Group Creation; Figure 11 Raid Group Creation; Table 4 Raid Group Creation - Fujitsu ETERNUS DX S5 Series Configuration Manual

6. Configuration Settings for RAID Groups or Thin Provisioning
When Using Standard Volumes

RAID Group Creation

Create RAID groups (groups of drives that configure RAID in the ETERNUS DX) to create volumes.
Create an operation RAID group and a backup RAID group.
Figure 11 RAID Group Creation
Operation RAID group (RG0)
600GB
600GB
600GB
600GB
RAID5 (4+1)
Table 4 RAID Group Creation
Usage
Operation RAID group (copy
source)
Backup RAID group (copy
destination)
The procedure to register a RAID group is as follows:
1
On the navigation of the ETERNUS Web GUI screen, click the [RAID Group] tab.
The [RAID Group] screen appears.
2
Click [Create] in [Action].
The [Create RAID Group] screen appears.
3
Enter the name of the RAID group that is to be registered. Select "Manual" for "Create Mode".
Backup RAID group (RG1)
1.92TB
600GB
Item
RG0
RG1
• Do not uninstall the drives that are installed by default or move them to any other
slot.
Contact your sales representative or maintenance engineer if drives that are
installed by default need to be uninstalled or moved to another slot.
1.92TB
1.92TB
RAID5 (2+1)
Create mode RAID type
Manual RAID5
Manual RAID5
109
Configuration drive
600GB SAS disk ´ 5
1.92TB SSD ´ 3
Configuration Guide (Basic)