Notes On Using Windows Server 2019 - Fujitsu ETERNUS LT260 User Manual

Chapter 4 Setting Backup Software
4.5 NetVault
10
11
4.5.2

Notes on Using Windows Server 2019

To use NetVault on Windows Server 2019, ETERNUS LT series Tape Library Driver is required.
Install the Windows Server 2016 device driver (w2k16) in Windows Server 2019.
For the download and the installation procedure of the Tape Library Driver, refer to the following website.
https://www.fujitsu.com/global/support/products/computing/storage/download/
FUJITSU Storage ETERNUS LT260 Tape Library User's Guide -Server Connection-
Click the [OK] button to go back to the [Edit Device] page and then click the [Save] button at the
bottom right of the page.
In the [Manage Devices] page of the WebUI, click the [Manage Library] button of the target
library to switch to the Tape Library Management page.
Reboot the LT260 by clicking the [Restart] button at the bottom right of the page.
The new settings are applied after the LT260 is rebooted.
Copyright 2019 FUJITSU LIMITED
55
End of procedure
P3AM-8812-07ENZ0