Table of Contents
Advertisement
Overview
1.3.4
Turning on the server
•
•
1.3.5
Media error
If a media error occurs during backup and the backup processing terminates abnormally,
the backup processing must be executed again.
If the backup processing must be completed within a certain period of time, design
operations to allow enough time to reexecute backup processing even for the longest
possible case.
1-4
If the server is turned on while the LT160 is being powered on, the LT160 may not
be correctly recognized by the server. In such cases, power on the server after the
initialization of the LT160 is completed.
When the LT160 is turned on through the RCI interface, allow the LT160 about ten
minutes to be ready for use. Set the server schedule so that no accessing is executed
from the server before the LT160 is ready for use. (For example, just prior to
activating the backup software, place the server in the sleep state for 10 minutes.)
C144-E073-01EN
Advertisement
Table of Contents
