Figure 7 Host Interface For Fc Cable Connection (Installed In A Controller); Figure 8 Host Interface For Fc Cable Connections (Equipped With Sfp+ Modules In All Ports And Installed In The Controllers) - Fujitsu ETERNUS AF250 S2 Basic Operation Manual
Hide thumbs
Also See for ETERNUS AF250 S2:
- Configuration manual (171 pages) ,
- Site planning manual (38 pages) ,
- Design manual (171 pages)
Table of Contents
Advertisement
1.
Component Names and LED Names
Controller Enclosures
■
Host Interfaces
A host interface is a board that has interface ports to connect a controller to the server.
There are three types of host interfaces: FC 32Gbit/s, FC 16Gbit/s, and iSCSI 10Gbit/s.
●
FC
The ports on the host interface are used for connecting a controller to a server with an FC cable. This port uses a
Dual LC connector.
Figure 7 Host Interface for FC Cable Connection (Installed in a Controller)
2
1
1.
Host interface (CA#0)
2.
Host interface port (CA#0, Port#0)
3.
Host interface port (CA#0, Port#1)
4.
Host interface (CA#1)
5.
Host interface port (CA#1, Port#0)
6.
Host interface port (CA#1, Port#1)
●
iSCSI 10Gbit/s (10GBASE-SR) (for FC Cable Connection)
The ports on the host interface are used for connecting a controller to a server with an FC cable. This port uses a
Dual LC connector.
Figure 8 Host Interface for FC Cable Connections (Equipped with SFP+ Modules in All Ports and Installed in the
Controllers)
2
1
1.
Host interface (CA#0)
2.
Host interface port (CA#0, Port#0)
3.
Host interface port (CA#0, Port#1)
4.
Host interface (CA#1)
5.
Host interface port (CA#1, Port#0)
6.
Host interface port (CA#1, Port#1)
3
3
FUJITSU Storage ETERNUS AF250 S2, ETERNUS AF250 All-Flash Arrays Operation Guide (Basic)
Copyright 2019 FUJITSU LIMITED
5
6
4
5
6
4
14
P3AG-1842-06ENZ0
Advertisement
Table of Contents
