Chapter 12 Configuration Import; Command References; Esfadm Devconf Import (Configuration Import Command) - Fujitsu ETERNUS SF Express V16.6 Migration Manual

Chapter 12
This chapter describes the configuration import.

12.1 Command References

12.1.1 esfadm devconf import (Configuration Import Command)

NAME
esfadm devconf import - import the configuration information from the previous version
SYNOPSIS
Windows Environment
$INS_DIR\Common\bin\esfadm devconf import -all
($INS_DIR is the program directory specified at the ETERNUS SF Manager installation.)
Solaris or Linux Environment
/opt/FJSVesfcm/bin/esfadm devconf import -all
DESCRIPTION
A request for the configuration information import from the previous version is issued to this product. OS Administrator permissions are
required in order to execute the command.
When the command is executed, this product starts asynchronously to import and convert the configuration information from the
previous version.
OPTIONS
-all
All configuration information registered at the previous version is imported.
At this version, specify this option.
EXIT STATUS
=0: Completed successfully
>0: Terminated abnormally
EXAMPLES
Windows Environment
> C:\ETERNUS_SF\Common\bin\esfadm devconf import -all
esfadm90000 Operation is accepted.
Solaris or Linux Environment
# /opt/FJSVesfcm/bin/esfadm devconf import -all
esfadm90000 Operation is accepted.
NOTES
-
Check that the targeted devices can be accessed from this product before executing this command.
-
Of the devices that were supported in the previous version, the information for the devices that are not supported in this version
is not imported. Refer to "Supported Devices" in the ETERNUS SF Installation and Setup Guide for information on the supported
devices in this version.
Configuration Import
- 268 -