Encryption Key Export And Import Functions - Fujitsu ETERNUS LT140 User Manual

Chapter 2 Setup and Operation Procedures
2.1 Basic Setup
2.1.5

Encryption Key Export and Import Functions

• An encryption key file that is created by exporting encryption keys from multiple data cartridges at the
same time can only be imported to the LT140. To import the encryption keys that were exported from the
LT140 to tape libraries that support a key management function (*1) different from the LT140, export
one encryption key per data cartridge.
• Regardless of the number of selected data cartridges, only one encryption key file is created when
encryption keys are exported from multiple data cartridges.
*1: ETERNUS LT220, LT230, LT250, LT260, LT270, and LT270 S2
• An encryption key is generated and assigned when a data write process is performed to the data
cartridge.
• For the LT140, if a maintenance part must be replaced due to a failure, the master key and encryption
keys may need to be exported and imported by the user.
2.1.5.1 Exporting the Encryption Key
Procedure
1
Move to the [Configuration > Encryption > LT Encryption] screen.
2
Select [Encryption Keys] > [Export Key] on the center pane.
FUJITSU Storage ETERNUS LT140 Tape Library Key Management Function Option User's Guide
45
Copyright 2019 FUJITSU LIMITED P3AG-3762-02ENZ0