Table of Contents
Advertisement
Chapter 2 Operator Panel Operation
2.3 Library Information Display
2.3.2
Host Interface Information
The topology setting and the WWN of the host interface adapter can be viewed.
Procedure
1
Click the [Host I/F] button on the Information menu.
Information menu
+Host I/F
2
Click the adapter number of the adapter for which you want to reference information.
Information menu
-Host I/F
+Adapter#0
Adapter numbers (Adapters #0 to #3) are assigned sequentially from the top of the library adapter
cards mounted in the device.
3
Information about the specified adapter is displayed.
•
Status: Connected card status
-
-
-
•
Type: Interface type and card type
Indicates "Fibre Channel" and the card type (1G, 2G, 4G, or 8G).
•
Topology: Topology setting status
The status indicates fabric connection or arbitrated loop connection (direct connection).
•
Addressing Mode: Addressing mode (only for arbitrated loop connection)
The status indicates either the Hard Address mode or the Soft Address mode.
•
LOOP ID: Loop ID of the library
The loop ID is displayed only when the topology status is arbitrated loop connection and the
addressing mode is Hard Address.
•
Link Speed: Indicates the Link Speed setting (Auto Negotiation) of the card.
•
WWNN: Worldwide node name of the adapter
•
WWPN: Worldwide port name of the adapter
•
LUN: LUN value (always 0 for the library)
FUJITSU Storage ETERNUS LT270 S2 Tape Library User's Guide -Panel Operation-
Normal: Indicates that the card is normal.
Error: Indicates that the card is abnormal and unrecognizable.
Not Connect: Indicates that the card is not connected to the host.
Copyright 2020 FUJITSU LIMITED
29
P3AM-6932-06ENZ0
Advertisement
Table of Contents
