Thin Provisioning Pool Creation; Table 6 Maximum Number Of Pools, Maximum Pool Capacity, And Determined Chunk Size For Each Model - Fujitsu ETERNUS DX S5 Series Configuration Manual

Hybrid storage systems
Hide thumbs Also See for ETERNUS DX S5 Series:
Table of Contents

Advertisement

6. Configuration Settings for RAID Groups or Thin Provisioning
When Using Thin Provisioning Volumes (TPVs)

Thin Provisioning Pool Creation

This function creates a Thin Provisioning Pool.
Caution
For the ETERNUS DX60 S5, SSDs or SEDs cannot be used for configuring TPPs.
Table 6
Maximum Number of Pools, Maximum Pool Capacity, and Determined Chunk Size for Each Model
Model
ETERNUS DX60 S5
ETERNUS DX100 S5
ETERNUS DX200 S5
ETERNUS DX500 S5
ETERNUS DX600 S5
ETERNUS DX900 S5
Determined chunk size (*3)
*1: Up to 256 pools can be created. When the maximum installation number of drives of a model is 512 or less, the maximum number of
pools is half the maximum installation number of drives.
The maximum pool number is the maximum total number of TPPs and Flexible Tier Sub Pools (FTSPs) that can be created in the
ETERNUS DX.
*2: The maximum pool capacity is specified when "Enable" is selected for the Thin Provisioning function. Refer to
Configuration" (page 120)
The maximum pool capacity is the maximum total capacity for TPPs and Flexible Tier Pools (FTRPs) that can be created in the ETERNUS
DX.
*3: Chunk size is a physical capacity that is assigned to virtual logical volumes created in TPPs and FTRPs when a write occurs from the host.
The chunk size is determined according to the "Maximum Pool Capacity" of the ETERNUS AF/DX when a new TPP is created.
There are two methods to create a TPP; automatic drive selection and manual drive selection.
Automatically Selecting Drives to Create TPPs
To create a new TPP automatically, select Drive Type and RAID Level, and input TPP capacity. The Controlling CM
of the RAID groups that configure the TPP is determined automatically.
Caution
When drives that satisfy all the following conditions are installed in the ETERNUS DX, select the drives
manually.
• The drive types are the same
• The drive capacities are the same
• The drive sector format (Advanced Format (AF) compliant or non-AF-compliant) is different
Maximum number of
Maximum pool capacity (*2)
pools (*1)
48
64TB, 128TB
72
128TB, 256TB
132
256TB, 384TB
256
384TB, 512TB, 1PB
256
512TB, 1PB, 1.5PB
256
512TB, 1PB, 2PB, 4PB, 8PB
21MB
for details.
122
2PB
4PB
6PB
16PB
24PB
128PB
336MB
"Thin Provisioning
Configuration Guide (Basic)

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents