Chapter 13 Storage Migration - Fujitsu ETERNUS DX S4 Series Configuration Manual

Chapter 13
Storage Migration
This chapter explains how to configure the server for performing Storage Migration.
When Storage Migration is performed, configure the settings so that the ETERNUS DX/AF LUNs can be used
from the server (AIX).
■
Setting Procedure Outline
Execute the operation to start Storage Migration from ETERNUS Web GUI. Perform all other operations in the
server (AIX).
1
Unmount the file system.
2
Deactivate the volume group.
3
Export the volume group.
4
Remove the LUN.
5
Turn off the server.
6
Start Storage Migration, change the connection destination to the migration destination ETERNUS
DX/AF, and then reboot the server.
7
Import the volume group.
8
Mount the file system.
■
Example Setting Procedure
The following procedure shows an example configuration for AIX 6.1.
1
Unmount the file system.
# df -m
Filesystem
/dev/hd4
/dev/hd2
(Omitted)
/dev/livedump
/dev/fslv00
# umount /mnt/fs001
# df -m
Filesystem
/dev/hd4
/dev/hd2
(Omitted)
/dev/livedump
#
FUJITSU Storage ETERNUS DX, ETERNUS AF Configuration Guide -Server Connection- (Fibre Channel) for AIX
MB blocks Free %Used Iused %Iused Mounted on
512.00 225.22 57% 17724
2816.00 327.03 89% 47964
256.00 255.64 1%
20000.00 18764.31 7%
MB blocks Free %Used Iused %Iused Mounted on
512.00 225.22 57% 17724
2816.00 327.03 89% 47964
256.00 255.64 1%
Copyright 2018 FUJITSU LIMITED
fCheck the mounted file system.
26% /
38% /usr
4 1% /var/adm/ras/livedump
5 1% /mnt/fs001
fUnmount the file system.
fConfirm that the file system is unmounted.
26% /
38% /usr
4 1% /var/adm/ras/livedump
34
P3AM-3782-23ENZ0