Data Migration; Storage Migration; Server Linkage Functions; Figure 3.18 Storage Migration - Fujitsu ETERNUS DX60 S3 Overview Manual

Disk storage system

Hide thumbs Also See for ETERNUS DX60 S3:

Table of Contents

Chapter 3

Functions

3.9

Data Migration

3.9

Data Migration

This section explains the function that migrates data from an old storage system to the ETERNUS DX.

3.9.1

Storage Migration is a function that migrates the volume data from an old storage system to volumes in a

new storage system without using a host in cases such as when replacing a storage system.

The source storage system and destination ETERNUS DX are physically connected using cables. Data read

from the target volume in the Migration Source is written to the Destination volume in the ETERNUS DX.

Since Storage Migration is controlled by ETERNUS DX controllers, no additional software is required.

The source storage system

3.10

The ETERNUS DX supports various functions that are provided by linking with servers.

Examples of linkage functions include a backup function that does not place a load on the server and a func-

tion that can obtain information from the ETERNUS DX and visualize this information without using ETERNUS

Web GUI. These functions enable integrated infrastructure management in a virtual environment.

Note that some of these functions may require installation of plug-ins. Refer to the following site for more

details:

http://www.fujitsu.com/global/services/computing/storage/eternus/tools/

Storage Migration

FUJITSU Storage ETERNUS DX60 S3 Disk storage system Overview

ETERNUS DX

P3AM-8972-01ENZ0

Table of Contents