Power:inrush:next - Agilent Technologies InfiniiVision 3000 X-Series Programmer's Manual

:POWer:INRush:NEXT

Command Syntax
:POWer:INRush:NEXT
The :POWer:INRush:NEXT command goes to the next step of the inrush
current analysis.
This command is equivalent to pressing the Next softkey on the
oscilloscope front panel when prompted during the analysis.
See Also
•
•
Agilent InfiniiVision 3000 X-Series Oscilloscopes Programmer's Guide
(see page 1138)
":POWer:INRush:APPLy"
":POWer:INRush:EXIT"
on page 547
on page 548
24
:POWer Commands
549