Table of Contents
Advertisement
U
VLAN M
SING THE
ANAGER
7 Click Tagged to add the port as a tagged port. Click Untagged to add the port as an
untagged port.
Note: If this is an untagged VLAN, you are not able to add a tagged port.
When you add an untagged port to a VLAN, it is automatically removed from any
other VLAN which uses the same protocol as the new VLAN, and where the port is
an untagged member.
You can add a switch to a VLAN as a unit—just select the switch without selecting
any ports, and click Tagged or Untagged to add the switch to the VLAN.
8 To remove a port from the VLAN, select the port from the Ports in VLAN list, and
then click Remove.
9 When you have finished adding ports to the VLAN, click Apply to have the changes
take effect.
The VLAN is created on the switches whose ports are members of the new VLAN.
Once you have added a VLAN, you can specify an IP address and mask for the VLAN
on each switch, and also enable or disable IP Forwarding.
1 To select the IP Forwarding tab at the top of the Add VLAN window.
The IP Forwarding page is displayed, as shown in Figure 7-6.
Figure 7-6: Add VLAN dialog, IP Forwarding page
7-8
E
W
E
M
XTREME
ARE
NTERPRISE
ANAGER
I
U
G
NSTALLATION AND
SER
UIDE
Advertisement
Table of Contents
