Vlan Configuration Procedures; Configuration-Stacking - Extreme Networks ExtremeXOS ScreenPlay User Manual

VLAN Configuration Procedures

Following are common procedures for using VLAN Configuration functions.
To Create a VLAN
1
1 From the VLAN List screen, click the Create command button. The New VLAN
Details pane is displayed. (This pane matches that shown in
2 Type in the required information.
3 To save the configuration, click the Save command button. The VLAN is saved
to the switch.
4 Click the Save Config command button to permanently save the new VLAN.
Deleting VLANs
To delete a VLAN:
1 From the VLAN List screen, click the name of the VLAN to be deleted. The
VLAN Details pane is displayed for the selected VLAN.
2 Click the Delete command button. The VLAN is deleted and the action is
confirmed.
Configuration—Stacking
This feature allows you to manage, view and monitor ExtremeXOS stackable
switches in a stack configuration. The feature is limited to viewing the node
configuration and monitoring the stack topology and interconnectivity among the
stack members. The configuration capabilities of actually setting up or maintaining
a stack are outside the scope of this feature.
The features available through the stacking configuration screen are:
Stack topology
■
Stack nodes and connectivity
■
Stack slot details
■
NOTE
This feature is available only on switches that support stacking. When the switch does not support
stacking, the submenu is grayed out.
ExtremeXOS ScreenPlay User Guide
ExtremeXOS ScreenPlay User Guide
Figure 12.)
22