Table 48: Show Qos-Profile Output Fields - Juniper JUNOSE SOFTWARE FOR E SERIES 11.3.X - QUALITY OF SERVICE CONFIGURATION GUIDE 2010-09-22 Configuration Manual

Meaning
Copyright © 2010, Juniper Networks, Inc.
host1#show qos-profile references tunnel-server 6/0
To display information about the QoS profiles attached to a specific L2TP session:
host1#show qos-profile references l2tp-session session1
To display attachments for QoS profiles only on the specified interface and not QoS
profiles stacked above the interface:
host1#show qos-profile references interface gigabitEthernet 6/0 explicit
Table 48 on page 323 lists the show qos-profile command output fields.

Table 48: show qos-profile Output Fields

Field Name
qos-profile
t-class group
interface type
rule type
traffic class
scheduler profile
queue profile
drop profile
statistics profile
attachment
Port attachments
DCM Profile attachments
Interface attachments
Not attached
Chapter 31: Monitoring QoS on E Series Routers
Field Description
Name of QoS profile
Name of the traffic-class group associated with the
interface
Type of interface
Whether the rule is a group node, scheduler node,
queue, or shadow node
Name of the traffic class associated with the interface
Name of the scheduler profile associated with the
interface
Name of the queue profile associated with the
interface
Name of the drop profile associated with the interface
Name of the statistics profile associated with the
interface
Type of interface or port type to which the QoS profile
is attached
Number of QoS profiles attached to port types
Number of QoS profiles attached to profiles for
Service Manager
Number of QoS profiles attached to interfaces
Number of QoS profiles that are unattached
323