Ip Pim Spt Status - Alcatel-Lucent OmniSwitch 6850-48 Cli Reference Manual

PIM Commands

ip pim spt status

Enables or disables last hop Designated Router (DR) switching to the Shortest Path Tree (SPT). If
enabled, last hop DR switching to the SPT begins once the first data packet is received.
ip pim spt status {enable | disable}
Syntax Definitions
enable
disable
Defaults
parameter
enable | disable
Platforms Supported
OmniSwitch 6850, 6855, 6850E, 9000E
Usage Guidelines
•
This command is supported only in the sparse mode.
•
As mentioned above, if SPT status is enabled, last hop DR switching to the SPT begins once the first
data packet is received.
•
To view whether SPT status is currently enabled (default) or disabled, use the
command.
Examples
-> ip pim spt status enable
-> ip pim spt status disable
Release History
Release 6.1.1; command was introduced.
Related Commands
show ip pim sparse
MIB Objects
alaPimsmGlobalConfig
alaPimsmAdminSPTConfig
OmniSwitch CLI Reference Guide
Enables last hop DR switching to the SPT.
Disables last hop DR switching to the SPT.
default
enable
Displays the status of the various global parameters for the PIM
sparse mode.
June 2012
show ip pim sparse
page 30-25