Display Poe-Power Supervision-Module - 3Com S7906E Command Reference Manual

Table 1-14 display poe-power status command output description
Switch Number
Switch x State
DC Output State
DC Output Voltage
DC Output Current
Module Number
Output AC Current A/B/C Alarm
Volt Phrase AB/BC/CA Alarm

display poe-power supervision-module

Syntax
display poe-power supervision-module
View
Any view
Default Level
1: Monitor level
Parameters
None
Description
Use the display poe-power supervision-module command to display the information of the
monitoring module of the PoE power.
Examples
# Display the information of the monitoring module of the PoE power.
<Sysname> display poe-power supervision-module
Supervision Version
Supervision Name
PoE Power Type
PoE Current Power
PoE Average Power
PoE Peak Power
PoE Nominal Power
PSU Available Number
PSU 1:
Nominal Output Power
Hardware Version Info
Field
: 2.6
: Summer Pms
: PSE2500-A
: 600 W
: 630 W
: 650 W
: 2400 W
: 1
: 2500(W)(220V)/1250(W)(110V)
: NP Series
Description
Number of power switches
State of a power switch
DC output state
DC output voltage
DC output current
Number of modules that a PSU contains
Output three-phase AC current state. See
AC voltage input state. See
1-19
Table 1-10.
Table 1-10.