1
Information Center Configuration Commands
Information Center Configuration Commands
display channel
Syntax
display channel [ channel-number | channel-name ]
View
Any view
Default Level
1: Monitor level
Parameters
channel-number: Displays information of the channel with a specified number, where channel-number
represents the channel number, in the range 0 to 9.
channel-name: Displays information of the channel with a specified name, where channel-name
represents the channel name, which could be a default name or a self-defined name. The user needs to
specify a channel name first before using it as a self-defined channel name. For more information, refer
to the info-center channel name command.
Table 1-1 Information channels for different output destinations
Output destination
Console
Monitor terminal
Log host
Trap buffer
Log buffer
SNMP module
Log file
Description
Use the display channel command to display channel information.
If no channel is specified, information for all channels is displayed.
Examples
# Display information for channel 0.
Information channel number
0
1
2
3
4
5
9
1-1
Default channel name
console
monitor
loghost
trapbuffer
logbuffer
snmpagent
channel9