Display Trapbuffer - 3Com S7906E Command Reference Manual

Default Level
1: Monitor level
Parameters
None
Description
Use the display logfile summary command to display the configuration of the log file.
Examples
# Display the configuration of the log file.
<Sysname> display logfile summary
Log file is enabled.
Channel number : 9
Log file size quota : 10 MB
Log file directory : flash:/logfile
Writing frequency : 24 hour 0 min 10 sec
Table 1-7 display logfile summary command output description
Field
Log file is
Channel number
Log file size quota
Log file directory
Writing frequency

display trapbuffer

Syntax
display trapbuffer [ reverse ] [ size buffersize ]
View
Any view
Default Level
1: Monitor level
Parameters
reverse: Displays trap messages from new to old. If this keyword is not specified, trap messages will be
displayed from old to new.
size buffersize: Displays specified number of the latest trap messages in a trap buffer, where buffersize
represents the number of the latest trap messages in a trap buffer, in the range 1 to 1,024.
The current state of a log file, which could be enabled or disabled.
The channel number of a log file, defaults to 9.
The maximum storage space reserved for a log file
Log file directory
Log file writing frequency
1-8
Description