Display Poe-Power Switch State - 3Com S7906E Command Reference Manual

Table 1-15 display poe-power supervision-module command output description
Field
Supervision Version
Supervision Name
PoE Power Type
PoE Current Power
PoE Average Power
PoE Peak Power
PoE Nominal Power
PSU Available Number
Nominal Output Power
Hardware Version Info

display poe-power switch state

Syntax
display poe-power switch state
View
Any view
Default Level
1: Monitor level
Parameters
None
Description
Use the display poe-power switch state command to display the switch information of the PoE
power.
Examples
# Display the switch information of the PoE power.
<Sysname> display poe-power switch state
Switch Number
Switch 1 State
Software version number of the monitoring module of the PoE power
Name of the monitoring module of the PoE power
Type of the PoE power
Current consumption power
Average power
Peak power
Nominal power
Number of available PSUs
Nominal output power of a PSU
Hardware version information of the PSU
: 1
: AC Switch High Voltage
1-20
Description