Poe Enable - 3Com S7906E Command Reference Manual

Field
Current
Configuration
Because not all the configurations of a PoE configuration file can be applied successfully, only the
configurations that currently take effect on the interface are displayed.

poe enable

Syntax
poe enable
undo poe enable
View
PoE interface view, PoE-profile file view
Default Level
2: System level
Parameters
None
Description
Use the poe enable command to enable PoE on a PoE interface.
Use the undo poe enable command to disable PoE on a PoE interface.
By default, PoE is disabled on a PoE interface.
If a PoE configuration file is already applied to a PoE interface, you need to remove the
application of the file to the PoE interface before configuring the interface in PoE-profile view.
If a PoE configuration file is applied to a PoE interface, you need to remove the application of the
file to the PoE interface before configuring the interface in PoE interface view.
Examples
# Enable PoE on a PoE interface.
<Sysname> system-view
[Sysname] interface ethernet 2/0/1
Configurations of the PoE configuration file that currently take effect on a PoE
interface
Description
1-24