Info-Center Trapbuffer - 3Com S7906E Command Reference Manual

Parameters
date: Indicates the current system date and time, the format of which depends on the log host.
no-year-date: Indicates the current system date and time (year exclusive).
none: Indicates that no time stamp information is provided.
Description
Use the info-center timestamp loghost command to configure the time stamp format of the system
information sent to the log host.
Use the undo info-center timestamp loghost command to restore the default.
By default, the time stamp format for system information sent to the log host is date.
Examples
# Configure that the system information output to the log host does not include the year information.
<Sysname> system-view
[Sysname] info-center timestamp loghost no-year-date

info-center trapbuffer

Syntax
info-center trapbuffer [channel { channel-number | channel-name } | size buffersize ] *
undo info-center trapbuffer [ channel | size ]
View
System view
Default Level
2: System level
Parameters
size buffersize: Specifies the maximum number of trap messages in a trap buffer, in the range 0 to
1,024 with 256 as the default value.
channel-number: Specifies a channel number, in the range 0 to 9.
channel-name: Specifies a channel name, which could be a default name or a self-defined name. The
user needs to specify a channel name first before using it as a self-defined channel name. For more
information, refer to the info-center channel name command.
Description
Use the info-center trapbuffer command to enable information output to the trap buffer and set the
corresponding parameters.
Use the undo info-center trapbuffer command to disable information output to the trap buffer.
By default, information output to the trap buffer is enabled with channel 3 (trapbuffer) as the default
channel and a maximum buffer size of 256.
Note that the info-center trapbuffer command takes effect only after the information center is enabled
with the info-center enable command.
1-24