Operation Interface - 3Com S7906E Command Reference Manual

Default Level
2: System level
Parameters
get: Obtains data from the HTTP server.
post: Transfers data to the HTTP server.
Description
Use the operation command to configure the HTTP operation type.
Use the undo operation command to restore the default.
By default, the HTTP operation type is get.
Examples
# Configure the HTTP operation type as post.
<Sysname> system-view
[Sysname] nqa entry admin test
[Sysname-nqa-admin-test] type http
[Sysname-nqa-admin-test-http] operation post

operation interface

Syntax
operation interface interface-type interface-number
undo operation interface
View
DHCP test type view
Default Level
2: System level
Parameters
interface-type interface-number: Type and number of the interface that is performing a DHCP test.
Description
Use the operation interface command to specify the interface to perform a DHCP test.
Use the undo operation interface command to restore the default.
By default, no interface is specified to perform a DHCP test.
Note that the specified interface must be up; otherwise, the test will fail.
Examples
# Specify the interface to perform a DHCP test as VLAN-interface 2.
<Sysname> system-view
[Sysname] nqa entry admin test
[Sysname-nqa-admin-test] type dhcp
1-15