Field
Receive response times
Min/Max/Average round trip time
Square-Sum of round trip time
Last succeeded probe time
Packet lost in test
Failures due to timeout
Failures due to disconnect
Failures due to no connection
Failures due to sequence error
Failures due to internal error
Failures due to other errors
UDP-jitter results
RTT number
SD max delay
DS max delay
Min positive SD
Min positive DS
Max positive SD
Max positive DS
Positive SD number
Positive DS number
Positive SD sum
Positive DS sum
Positive SD average
Positive DS average
Positive SD square sum
Positive DS square sum
Min negative SD
Min negative DS
Max negative SD
Number of response packets received
Minimum/maximum/average roundtrip time
Square sum of roundtrip time
Time of the last successful probe in a test
Average packet loss ratio
Number of timeout occurrences in a test
Number of disconnections by the peer
Number of failures to connect with the peer
Number of failures owing to out-of-sequence packets
Number of failures owing to internal errors
Failures due to other errors
UDP-jitter test results, available only in UDP-jitter tests.
Number of response packets received
Maximum delay from the source to the destination
Maximum delay from the destination to the source
Minimum positive jitter delay from the source to the destination
Minimum positive jitter delay from the destination to the source
Maximum positive jitter delay from the source to the destination
Maximum positive jitter delay from the destination to the source
Number of positive jitter delays from the source to the
destination
Number of positive jitter delays from the destination to the
source
Sum of positive jitter delays from the source to the destination
Sum of positive jitter delays from the destination to the source
Average of positive jitter delays from the source to the
destination
Average of positive jitter delays from the destination to the
source
Sum of the square of positive jitter delays from the source to the
destination
Sum of the square of positive jitter delays from the destination
to the source
Minimum absolute value of negative jitter delays from the
source to the destination
Minimum absolute value of negative jitter delays from the
destination to the source
Maximum absolute value of negative jitter delays from the
source to the destination
1-6
Description
Need help?
Do you have a question about the S7906E and is the answer not in the manual?