Poe Pd-Policy Priority; Poe Power Max-Value - 3Com S7906E Command Reference Manual

Description
Use the poe pd-description command to configure a description for the PD connected to a PoE
interface.
Use the undo poe pd-description command to restore the default.
By default, no description is available for the PD connected to a PoE interface.
Examples
# Configure the description for the PD connected to Ethernet 2/0/1 as IP Phone for Room 101.
<Sysname> system-view
[Sysname] interface ethernet 2/0/1
[Sysname-Ethernet2/0/1] poe pd-description IP Phone For Room 101

poe pd-policy priority

Syntax
poe pd-policy priority
undo poe pd-policy priority
View
System view
Default Level
2: System level
Parameters
None
Description
Use the poe pd-policy priority command to configure a PD power management priority policy.
Use the undo poe pd-policy priority command to remove the PD power management priority policy.
By default, no PD power management priority policy is configured.
Examples
# Configure a PD power management priority policy
<Sysname> system-view
[Sysname] poe pd-policy priority

poe power max-value

Syntax
poe power max-value max-power
undo poe power max-value
View
System view
1-29