3Com S7906E Command Reference Manual page 2256

next-hop
Syntax
next-hop ip-address
undo next-hop
View
ICMP-echo test type view
Default Level
2: System level
Parameters
ip-address: IP address of the next hop.
Description
Use the next-hop command to configure the next hop IP address for an IP packet.
Use the undo next-hop command to remove the configured next hop IP address.
By default, no next hop IP address is configured.
Examples
# Configure the next hop IP address as 10.1.1.1.
<Sysname> system-view
[Sysname] nqa entry admin test
[Sysname-nqa-admin-test] type icmp-echo
[Sysname-nqa-admin-test-icmp-echo] next-hop 10.1.1.1
nqa
Syntax
nqa entry admin-name operation-tag
undo nqa { all | entry admin-name operation-tag }
View
System view
Default Level
2: System level
Parameters
admin-name: Specifies the name of the administrator who creates the NQA test operation, a string of 1
to 32 characters, with "-" excluded. It is case-insensitive.
operation-tag: Specifies the tag of a test operation, a string of 1 to 32 characters, with "-" excluded. It is
case-insensitive.
all: All NQA test groups.
1-11