Display Mac-Address Aging-Time - 3Com S7906E Command Reference Manual

MAC ADDR
00e0-fc01-0101 1
--- 1 mac address(es) found
Table 1-1 display mac-address command output description
Field
MAC ADDR
VLAN ID
STATE
PORT INDEX
AGING TIME(s)

display mac-address aging-time

Syntax
display mac-address aging-time
View
Any view
Default Level
1: Monitor level
Parameters
None
Description
Use the display mac-address aging-time command to display the aging time of dynamic entries in the
MAC address table.
Related commands: mac-address (system view), mac-address (Ethernet interface view),
mac-address timer, display mac-address.
Examples
# Display the aging time of dynamic entries in the MAC address table.
<Sysname> display mac-address aging-time
Mac address aging time: 300s
VLAN ID STATE
Config static Ethernet2/0/2
---
MAC address
ID of the VLAN to which the MAC address belongs
State of a MAC address, includes:
Config static: static entry configured by the user manually
Config dynamic: dynamic entry configured by the user manually
Learned: entry learned by the device
Blackhole: blackhole entry
Number of the port corresponding to the MAC address, that is,
packets destined to this MAC address will be sent out from this port.
(Displayed as N/A for a blackhole MAC address entry).
Aging time, which could be:
AGING, indicates that the entry is aging.
NOAGED, indicates that the entry does not age.
PORT INDEX
Description
1-2
AGING TIME(s)
NOAGED