Enable Log Updown - 3Com S7906E Command Reference Manual

Description
Use the display trapbuffer command to display the state and the trap information recorded.
Absence of the size buffersize argument indicates that all trap information is displayed.
Examples
# Display the state of the trap buffer and the trap information recorded.
<Sysname> display trapbuffer
Trapping buffer configuration and contents:enabled
Allowed max buffer size : 1024
Actual buffer size : 256
Channel number : 3 , channel name : trapbuffer
Dropped messages : 0
Overwritten messages : 0
Current messages : 1
#Dec 31 14:01:25 2004 Sysname DEV/2/LOAD FINISHED:
Trap 1.3.6.1.4.1.2011.2.23.1.12.1.20: frameIndex is 0, slotIndex 0.4
Table 1-8 display trapbuffer command output description
Trapping buffer configuration and contents
Allowed max buffer size
Actual buffer size
Channel number
channel name
Dropped messages
Overwritten messages
Current messages

enable log updown

Syntax
enable log updown
undo enable log updown
View
Interface view
Default Level
2: System level
Field Description
Indicates the current state of the trap buffer and its
contents, which could be enabled or disabled.
The maximum buffer size allowed
The actual buffer size
The channel number of the trap buffer, defaults to 3.
The channel name of the trap buffer, defaults to
trapbuffer.
The number of dropped messages
The number of overwritten messages (when the
buffer size is not big enough to hold all messages, the
latest messages overwrite the old ones).
The number of the current messages
1-9