Info-Center Loghost - 3Com S7906E Command Reference Manual

View
System view
Default Level
2: System level
Parameters
dir-name: The name of the directory where a log file is saved, a string of 1 to 64 characters.
Description
Use the info-center logfile switch-directory command to configure the directory where a log file is
saved. Ensure that the directory is created first before saving a log file into it.
By default, the directory to save a log file is the logfile directory under the root directory of the storage
device. For a device supporting CF partition, the directory to save a log file is the logfile directory in the
second partition of the storage device.
Note that this command can be used to configure the directory to which a log file can be saved. The
configuration will lose after system restart or active/standby switchover of the main control boards.
Examples
# Create a directory with the name test under flash root directory.
<Sysname> mkdir test
%Created dir flash:/test.
# Set the directory to save the log file to flash:/test.
<Sysname> system-view
[Sysname] info-center logfile switch-directory flash:/test

info-center loghost

Syntax
info-center loghost host-ip [ channel { channel-number | channel-name } | facility local-number ] *
undo info-center loghost host-ip
View
System view
Default Level
2: System level
Parameters
host-ip: The IP address of the log host.
channel: Specifies the channel through which system information can be output to the log host.
channel-number: Specifies a channel number, in the range 0 to 9.
channel-name: Specifies a channel name, which could be a default name or a self-defined name. The
user needs to specify a channel name first before using it as a self-defined channel name. For more
information, refer to the info-center channel name command.
1-15