Password (Ftp Test Type View); Probe Count - 3Com S7906E Command Reference Manual

[Sysname-nqa-admin-test-dhcp] operation interface vlan-interface 2

password (FTP test type view)

Syntax
password password
undo password
View
FTP test type view
Default Level
2: System level
Parameters
password: Password used to log onto the FTP server, a string of 1 to 32 characters. It is case sensitive.
Description
Use the password command to configure a password used to log onto the FTP server.
Use the undo password command to remove the configured password.
By default, no password is configured for logging onto the FTP server.
Related commands: username, operation.
Examples
# Configure the password used for logging onto the FTP server as ftpuser.
<Sysname> system-view
[Sysname] nqa entry admin test
[Sysname-nqa-admin-test] type ftp
[Sysname-nqa-admin-test-ftp] password ftpuser

probe count

Syntax
probe count times
undo probe count
View
Any NQA test type view
Default Level
2: System level
Parameters
times: Number of probes in an NQA test, in the range 1 to 15.
1-16