When the PoE power is insufficient, power is first supplied to PSE with a higher power priority level.
Examples
# Set the power priority of PSE 7 to critical.
<Sysname> system-view
[Sysname] poe priority critical pse 7
poe pse-policy priority
Syntax
poe pse-policy priority
undo poe pse-policy priority
View
System view
Default Level
2: System level
Parameters
None
Description
Use the poe pse-policy priority command to configure a PSE power management priority policy.
Use the undo poe pse-policy priority command to remove the PSE power management priority
policy.
By default, no PSE power management priority policy is configured.
Examples
# Configure a PSE power management priority policy.
<Sysname> system-view
[Sysname] poe pse-policy priority
poe update
Syntax
poe update { full | refresh } filename pse pse-id
View
System view
Default Level
2: System level
Parameters
full: Specifies to upgrade the PSE processing software in full mode when the software is unavailable.
1-32
Need help?
Do you have a question about the S7906E and is the answer not in the manual?